Custom lighting manufacturer · own factory in Guzhen, Zhongshan, China WhatsApp: Show number
Own factory · Guzhen, Zhongshan · 12+ years in lighting

Custom lighting, made by hand — to your drawing, for one room.

A designer’s sketch, a phone photo, an idea. Our hands turn it into a fixture built once, for one ceiling, in our own factory — designed, wired and assembled in-house, with metalwork and surface finishing from long-term partner workshops built to our drawings.

Tiered silk chandelier installed in a double-height villa lobby — custom made by LIEBON LIGHTING
15–20 days
Prototype before mass production
24 months
On driver, light source and wiring
Every unit
Lit, load-tested and checked before packing
One working day
Reply to your enquiry
Own factory · Guzhen Export documentation handled Market certification arranged per project Stage photos & video at every step
Why buyers choose us

You are talking to the factory, not a trading desk

Most problems in this industry come from one thing: the person quoting you cannot see the production floor. We can — because it is ours.

  • Assembly, wiring, QC and packing in our own workshop — metalwork, polishing and plating by long-term partner shops, built to our drawings and re-inspected before assembly
  • Prototype built in 15–20 days before any mass production
  • Stage photographs and video at every key production step
  • Finish sample retained per order so repeat batches match
  • Export documentation handled; market certification arranged per project
LED mirrors

K9 crystal LED vanity mirrors — 18 models in stock production

Oval, arch, heart, Hollywood, full-length and RGB colour-changing. Touch dimmer, tri-colour LED, eco-silver glass. MOQ 50 pcs — a fast-moving add-on line for lighting distributors and hotel projects.

See all 18 mirror models ›

Not renders

Real pieces, on site and in our workshop

Every clip below is a fixture we designed and built in Guzhen, Zhongshan. Photos can be bought; this cannot. Tap to watch.

Crystal sphere cluster installed on site
Installed

Crystal spheres, installed

Watch the site installation
Banquet hall chandeliers during fit-out
Installed

Banquet hall, on site

Watch the site installation
Crystal ball chandelier in hotel lobby
Installed

Crystal ball chandelier

Watch the site installation
Hotel lobby ceiling installation completed
Installed

Ceiling installation, completed

Watch the ceiling fit-out
Stone-glass chandelier installed overseas
Installed

Stone-glass chandelier

Watch the installed piece
Art-glass spiral chandelier in showroom
Installed

Art-glass spiral

Watch the site installation
Glass-leaf cascade chandelier
Installed

Glass-leaf cascade

Watch the site installation
Butterfly spiral chandelier
Installed

Butterfly spiral chandelier

Watch the installed piece
Ring crystal chandelier
Showroom

Ring crystal chandelier

Watch the showroom piece

See more project cases ›

Send us your drawing

Your sketch becomes a fixture — three real examples

Every piece below started as a customer’s drawing, photo or idea. We turned it into a buildable 1:1 design, built it by hand, and shipped it. This is exactly how a custom order runs.

Hand-woven dolphin light sculpture built from a client sketch
Art installation

Dolphin & whale sculpture

Client sent: a hand-drawn sea-life sketch

We built: a 3.6 m hand-woven mesh sculpture, lit

Crystal ball chandelier built to a lobby specification
Hotel lobby

Crystal ball chandelier

Client sent: a lobby photo + ceiling height

We built: a ring crystal chandelier to spec

Art-glass spiral chandelier made from a reference image
Showroom

Art-glass spiral

Client sent: a reference pin + dimensions

We built: a bespoke spiral chandelier

See how a custom order runs ›

What we make

Six product lines, one production team

Every item below can be customised in size, finish, material and light output. Send a sketch, a photo or a reference — we will turn it into a buildable drawing.

How an order runs

From your drawing to your ceiling, in nine steps

No catalogue to choose from, no guessing at scale. This is the exact sequence every custom order runs through — and what you receive at each stage.

01

Enquiry

You send dimensions, a reference photo, a drawing or just a description. We confirm feasibility within 24 hours — including telling you if something will not work, before you spend anything.

Reply within 24 hNo charge
02

Quotation

An itemised quote: material, finish, light source, packing, unit price, MOQ and lead time. No lump sums, and no line items that quietly appear later.

ItemisedWritten
03

Design & 1:1 drawing

We turn the agreed concept into a buildable drawing, scaled to your ceiling height and footprint, so you see the real proportions before anything is committed.

Scaled 1:1Structural check
04

Price & deposit

You approve the drawing and pay the 50% deposit. That is what books your production slot — the queue runs on deposits, not promises.

50% T/TSlot booked
05

Prototype

A sample or representative section is built in 15–20 days, then photographed and filmed under light for your written approval. Nothing goes to mass production until you sign off. That period is for a single sample: several samples running together take longer, and we put the date in writing before we start.

15–20 daysSingle sample
06

Production

Metal frames come back from our long-term partner workshops cut and welded to our drawings; wiring, assembly and QC happen in our own workshop. You receive stage photographs as the piece progresses.

In-house assemblyStage photos
Types of work

Where our fixtures ended up

Quality & compliance

Tested before it ships, documented when you need it

No certificates printed for show. Every order is tested in-house, and market certification is arranged with you per project — with the responsibility split stated honestly.

IQC

Incoming inspection on LED, driver and hardware.

Safety tested

Insulation, earthing and polarity on every single unit.

Lit and tested

Every unit powered and run before anything is packed.

24 months

On LED driver, light source and wiring; 12 months on finish.

Questions, answered

The things buyers ask before ordering

How much will my custom fixture cost?
It depends on size, material, crystal or glass grade, element count and finish — which is why we quote per project rather than publishing a price list. Send us the size you need, a reference image and the quantity, and you will get an itemised quotation within one working day. The quote breaks out material, finish, light source, packing and lead time, and nothing is added to it later without your written agreement.
What is your minimum order quantity?
One piece. For a genuinely custom fixture there is no sensible reason to force a container minimum on you — a single piece for a villa is a normal order for us. For OEM and wholesale programmes the MOQ depends on the component and finish, and we will state it clearly in the quotation.
What is your lead time?
A single prototype takes 15–20 days from the approved drawing. Production after your written approval is 60–80 days depending on size, material and quantity, plus shipping. If you have a hard handover date, tell us at the enquiry stage — we would rather decline a date we cannot hit than promise one we cannot keep.
Do you make a prototype or sample first?
Yes, on custom work this is standard. We build a sample or a representative section, photograph and video it under light, and send it to you for written approval. Nothing goes into mass production until you sign off. On large or complex pieces we may also send a physical finish sample by courier. Allow 15–20 days for a single sample.
How long does a sample take, and will it be rushed?
15–20 days for a single sample, counted from the drawing you approve. A sample is a hand-made one-off, not a production-line item: it takes a skilled pair of hands for most of a working day, and we run samples for more than one customer at a time. So the honest date depends on how much workshop time your piece needs. If you send several samples together, or the piece involves hand-blown glass, custom plating or an unusual frame, we will quote a longer date at the start rather than promise a week and hand you something you cannot approve. If you have a fixed deadline, say so at enquiry stage and we will tell you plainly whether we can meet it — we would rather decline a date than miss one. What we will not do is shorten the sample to hit a number and leave you to discover the problems at production stage.
What should I send with my enquiry?
The more you send, the closer the first sample will be. Most useful: overall dimensions and ceiling height; a photo, render or sketch of the target look; material and finish preference or a RAL / Pantone code; quantity, target market and required delivery date; the certification your customs or client needs; and the voltage and dimming requirement for the destination country. No drawing is fine too — a photo and a measurement is enough to start.
Find your way in

Browse by product, by application and by who you are

Most buyers arrive looking for one of these three things. Pick the door that matches your enquiry and you will get to the right products faster.

Have a project you need quoted?

Send dimensions, a drawing or a reference photo. You get a straight answer — including “this will not work” if that is the truth — within one working day.

Request a Quote
“A mould repeats. A hand responds. Made once, for one room — send us a sketch on a napkin, and if it can be built, we will build it, and tell you honestly if it cannot.”
LIEBON LIGHTING — Guzhen, Zhongshan
Chat on WhatsApp